Dual Push-button Plug

Push button is a kind of switch which causes a temporary change in the state of an electrical circuit only when the button is pressed. Elint Labz has built a plug to utilize this unique hardware. This plug can be mounted anywhere using screws. In the below picture you can see Dual push button plug.

Dual push button plug has two push buttons with pull down resistor circuits and it acts as a digital input device to the interfacing system. It has a interfacing port with four pins named as G, V & D1 and D2. Here G represents Ground , V represents VCC and D 1 represents Data pin1 and D2 represents Data pin2 at which digital input signals from the plug can be obtained. When the push button is in pressed state then Data pin gives the HIGH signal. When it is in released state then Data pin gives the LOW signal.

  • Operating voltage: 5V
  • Size: 20mm x 20mm
  Push button type   Version    Push button head      Port Type          SKU
          Small     V1           Short head Straight EL-DPBP-SS-101
Right-angled EL-DPBP-SS-102
         Long head Straight EL-DPBP-SL-101
Right-angled EL-DPBP-SL-102

Manual contains all required information for interfacing along with example codes.

YOU MIGHT ALSO LIKE

Leave a Reply